logo

X-NUCLEO-IDS01A4

主要参数
型号 X-NUCLEO-IDS01A4
SKU 11205 库存
规格   品牌 ST
价格表
数量 1+ 2+ 3+ 4+
含普票 ¥ 128 ¥ 125 ¥ 123 ¥ 122
含13%增票 ¥ 137.75 ¥ 134.52 ¥ 132.37 ¥ 131.3
版权所有,侵权必究。未经许可,不得用于商业用途。

产品简介

The X-NUCLEO-IDS01A4 is an evaluation board based on the SPIRIT1 RF module SPSGRF-868 expansion of STM32 Nucleo boards. The SPSGRF-868 module operates in the 868 MHz ISM band and is ETSI certified. Identification of the operating frequency of the X-NUCLEO-IDS01Ax (x=4 or 5) is performed through two resistors (R14 and R15). It is compatible with the MORPHO and Arduino UNO R3 connector layout. The X-NUCLEO-IDS01A4 interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.

X-NUCLEO-IDS01A4是ST公司推出的一款针对STM32 Nucleo设计的射频扩展板,兼容Arduino UNO R3接口,通过SPI和GPIO与MCU进行通信。
采用SPIRIT射频模块SPSGRF-868,该模块工作在868MHz的ISM频段,集成巴伦与片上天线,通过ETSI认证。
ST公司同时也提供了STM32Cube的软件扩展包 X-CUBE-SUBG1,降低了开发门槛,方便用户在不同MCU系列中进行程序移植。

特点

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
  • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
  • Integrated Balun (BALF-SPI-01D3)
  • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

资源简介图

产品图片


X-NUCLEO-IDS01A4 带包装正面图

X-NUCLEO-IDS01A4 正面图

X-NUCLEO-IDS01A4 正面斜视图

X-NUCLEO-IDS01A4 背面斜视图

开发资料

资料包括:

  • 用户手册
  • 电路原理图
  • 示例程序
  • 开发资料
  • 开发软件

路径: www.waveshare.net/wiki/X-NUCLEO-IDS01A4

配置清单

  1. X-NUCLEO-IDS01A4 x 1